Aspire Maxi Tank

Description

The Aspire Bottom Dual Coil Maxi is a Bottom Dual coil tank . The Maxi holds 1.5mL, is very easy to fill and doesn’t leak! The slim profile makes it a perfect fit for all ego twist batteries and other VV mods.

Colors available: clear and smoked

Note: Aspire Maxi tanks come pre-installed with a 1.8ohm coil, but you will need to purchase a 2.1ohms coil if you decide to vape at more than 3.8v.

Click Here to Purchase Extra coils

First time Setup Instructions

1. Hold the Aspire Maxi upside down and tilted slightly
2. unscrew the base
3. With the needle tip of your bottle facing towards the inside edge of the tank, fill up with your favorite flavor. Do not fill juice over the center post
4. screw the base back on firmly, making sure that it is flush with the tank
5. As with all fresh coils, you will want to let your  tank  rest for about 5 minutes before taking your first puff. This gives the wicks time to soak up juice. This will greatly lessen the chance of dry, burnt hits.
6. Do not put the Maxi on your device yet – take a couple of “Dry Sucks” from your tank, this will soak your wicks even more
7. If you are using an regular(non-variable) Ego battery SKIP THIS STEP. Variable Device Users- Before attaching the Maxi make sure your device is at its’ lowest setting
8. Attach your tank to your device, making sure all threading is lined up – do not over tighten
9. Take a few short puffs to warm up the coils, then vape away!
10. Variable Users: Once you have taken a few puffs and your coils are warmed up. you may then gradually increase the power to your liking.

*If you would like to use the Aspire on a flat top mod, you would need to purchase a 510-ego adapter for stabilization.